Catalog and Reference Library

MARWELL CORPORATION

E/Z 1800 SERIES ADAPTER

RINGLESS STYLE SOCKET ADAPTER BASE

UL and cUL Listed in the 1800 and 1800-1 models
Molded from High Impact Fiberglass Reinforced Polycarbonate
Fits Ring and Ringless Styles
Surge Ground System Standard on all Models
Patented Mighty-Bite Jaw Design

Purpose: The E/Z 1800 Extender Adapters provide a means to install load survey recorders and other types of recording equipment to ringless style sockets. The design of the base permits the complete assembly (survey equipment connected to adapter ) to be installed on the ringless style socket after the cover has been installed. The latch screws are cross drilled to permit the installation of meter seals. The E/Z 1800 can also be installed on ring type sockets.

Available for 4,5,6,7,8 and 13 terminal sockets in the following lengths.

3 3/4" X 7" for 1000-0-R	E/Z 1800*
4 3/4" X 7" for 1000-R	E/Z 1800-1*
5 3/4" X 7" for 1002-R	E/Z 1800-2

Units id RED* are both UL and cUL Listed.

Ordering Instructions: The E/Z 1800 Adapters are shipped in standard packages of 8 adapters.

Volume discounts are available.

Top of Page

	Portable Document Format (pdf) is used exclusively throughout this web site. Documents converted and stored in "pdf" are identified by this symbol and may only be displayed/printed using the Adobe® Acrobat® Reader.
	The Adobe® Acrobat® Reader may be downloaded at no cost by clicking here, or by visiting http://www.adobe.com.
	This site is best when viewed with Netscape® Navagator®. Click for additional information.

We Gladly Accept Cash, Checks,Company POs, and .

Marwell Corporation
PO Box 139
Mentone, CA 92359

Phone: (909) 794-4192
Fax: (909) 794-0250

Latest Update: May 24, 2000

Webmaster

Home