PrintE-mail

E/Z 1800 SERIES ADAPTER RINGLESS STYLE SOCKET ADAPTER BASE

1800The E/Z 1800 Extender Adapters provide a means to install load survey recorders and other types of recording equipment to ringless style sockets. The design of the base permits the complete assembly (survey equipment connected to adapter ) to be installed on the ringless style socket after the cover has been installed. The latch screws are cross drilled to permit the installation of meter seals. The E/Z 1800 can also be installed on ring type sockets.

 

 

  • UL and cUL Listed in the 1800 and 1800-1 models
  • Molded from High Impact Fiberglass Reinforced Polycarbonate
  • Fits Ring and Ringless Styles
  • Surge Ground System Standard on all Models
  • Patented Mighty-Bite Jaw Design
Available for 4,5,6,7,8 and 13 terminal sockets in the following lengths.
3 3/4" X 7" for 1000-0-R E/Z 1800*
4 3/4" X 7" for 1000-R E/Z 1800-1*
5 3/4" X 7" for 1002-R E/Z 1800-2

Units id * are both UL and cUL Listed.

Ordering Instructions: The E/Z 1800 Adapters are shipped in standard packages of 8 adapters.